Register device on the Calibration Portal

Upon registration of the device, you will be able to download your Digital Calibration Certificate, Declaration of Conformity and Product Manual.

How to register

  1. Go to portal.rivertrace.com
  2. Sign In or click ‘New Customer Registration’ and follow onscreen instructions. *NOTE* If you need all your team to view the device data and calibration certificates, please use a fleet or vessel email address. E.g. Fleet@shipping.com


  3. Once verified, you will land on the Customer Dashboard. Click on Device Registration tab on the left navigation panel
  4. Enter the Part Number and Serial Number of your device calibrated cell

    This will be identifiable by the Silver label on the front of the Calibrated cell. Note the Part number is the 1st 6 digits followed by the Serial Number e.g.
    OCD CM – Matched Cell and Chip will be part number 106970
    SMART BILGE – SMART CELL will be part number 109072
    SMART PFM  - Calibrated cell will be part number 111429
    SMART ODME - Calibrated Cell will be part number 109409
    SMART ESM - PAH Cassette will be part number  112250 
    SMART ESM - Turbidity Cassette will be part number 112249 
  5. Enter the IMO number of the Vessel you are installing the device onto. This will automatically add the details of the vessel for you to verify.
  6. You will then be able to download your electronic Calibration Certificate and product manuals from the Registered Devices List.
    This will show a list of all registered devices under your account.

Next Steps

We will send you an automated reminders when your device is due for re-calibration by email.