Smart ODME

A number of articles that are aimed at assisting in the diagnostics, repair and maintenance of the Smart ODME system.

• ODME Remote diagnostics and repair.
• Rivertrace MEPC.108(49) Compliant equipment overview
• Self-test Failure - Air ER, Wiper ER and 1000ppm ER
• ODME Self-Test Pressures
• Manually checking Auto-clean Functionality.
• Smart ODME RT14 Flow meter totaliser and DP490 Flow meter paddle wheel details
• RT14 flow meter totaliser calibration
• Checking the isolation barriers within you flow meter totaliser module.
• What type of flow meter are you looking for help with?
• RT14 Flow totaliser - No Flow reading at ODME Computer module
• Checking the Smart ODME Flow totaliser mA output.
• Smart ODME RT14 flow totaliser settings guide.
• Checking the ODME Flow meter paddle assembly.
• Smart ODME Pressure errors
• Self-test failures
• Communications Failure - Checking the communications of the measuring cell
• Smart ODME Pressure transducer information.
• Suspect failure of the Smart ODME Zener barrier PCB
• ODME Computer module hardware jumper settings guide
• Smart ODME measuring cell replacement
• High PPM readings and measuring cell accuracy.
• Checking the fresh water reading
• Smart ODME Computer IO PCB Replacement
• Smart ODME 490 Flow meter rotor removal
• ODME Speed Pulse Input settings
• Smart ODME Printer trouble shooting.
• GPS Information
• IMO Dump for ODME using the Rivertrace IMO log
• Smart ODME Bucket test